Proteus compim hyperterminal

proteus compim hyperterminal

http://www.google.co.kr/#hl=ko&newwindow=1&output=search&sclient=psy-ab&q=proteus+compim+hyperterminal&oq=proteus+compim&aq=1vL&aqi=g-L1g-vL2&aql=&gs_l=hp.1.1.0i19j0i15i19l2.4875696l4893569l1l4895966l19l19l1l0l0l0l349l3577l0j7j9j1l18l0.frgbld.&psj=1&bav=on.2,or.r_gc.r_pw.r_qf.,cf.osb&fp=61df775d5e3e40b7&biw=863&bih=621

추가 : http://electrotech99.blogspot.com/2011/02/virtual-gps-engine-for-simulation-in.html

답

http://www.edaboard.com/thread78593.html

Look at the reply above instead. The solution is there ! 

You need to replace Virtual Terminal with COMPIM (virtual COM interface). You must have 2 COMs free in your PC and a null modem cable (crossed). 

Say you have COM1 and COM2 free. Connect the null modem between the two ports as a link and set COMPIM as the port COM1. Then use Windows Terminal (or whichever program you like) and set it as COM2. You'll see that any outputs that before were sent to the Virtual Terminal are now sent to Windows Terminal (or any other you may use). 

Alternatively, if you don't have 2 physical COMs free then you may use some software driver, like Virtual Serial Ports Driver XP fromhttp://www.eltima.com/products/vspdxp/